Pages

Wednesday, March 28, 2012

The Fireplace, Part I

It's time to start working on the fireplace mantel again.  I won't tell you how long it's been, but it rhymes with "tree deers".  Here's where we stand.


Except for the actual fireplace, all the tile and woodwork I did myself.  The wood is black walnut.  You're probably asking, "what the hell is going on with the top?"  Well, I'll tell you.

We don't plan on mounting a television above the fireplace.  BUT, never is a mighty long time, so who knows what will be going on years from now.  The top is for television mounting.  It will be covered (we'll get to the plan in a minute), so what you're seeing now will be hidden.  A television can be mounted in the middle, a hole cut in the panel that will be in place and the wires dropped down the open section in the middle right down into the current top of the mantel.


There is a one inch gap there, although it's a little tough to make out, that wires can fall into.


In the mantel piece above the fireplace, I've placed a panel to allow access into that area.  Below is with the panel removed.


The wires can then be dropped down the pillar on the left side and come out along the outside where a cabinet could be placed housing all of the television accoutrements.

That's where we're at so far.  Next up is going to be the upper mantel.  It's going to look like a smaller version of the bottom section and will go all the way to the ceiling.  Below is my high tech, super CAD drawing.  Yes, Virginia, pencil and paper still do exist.

I'm still a little concerned about the proportions.  As such, I decided to transfer the dimensions for the upper pillars to a piece of plywood.  That's below, although a little tough to see.  I never said I was a photographer.




I'm going to cut this out and put it up on the mantel to see if it looks alright.  One thing I don't want is for the top to appear heavier then the bottom.  I'm sure there's some math I could bust out in order to accomplish this, but I'm a simple guy and holding a piece up should suffice.

This template will also serve as a building diagram.  Plywood is cheap.  Walnut is expensive.  This way I can cut the pieces and fit them directly to the template.  No measuring.  Less fractions.  The world is a better place that way.

As the two of you will also notice, this post is labeled part I.  Stay tuned.  I would say "next up is...", but I haven't gotten that far, yet.

4 comments:

  1. The template is a great idea. I do that a lot with paper for things in our house. I like the look so far. Keep us posted.

    ReplyDelete
  2. Thank you, Sherlock. I read the North Bennett Street School in Boston has all of its students create actual size drawings, so I figured it's a good way to go. Also, I'm not very good at figuring out how to add back 2" of wood to a piece cut short.

    ReplyDelete
  3. Woah there boy! You just stop right now and consider what you've done.

    A television above a fireplace? What are you, a gypsy? For the love of Barry Gibb, pull yourself together. Fire surrounds are to lean on, beer in hand, whilst you lecture your children on the perils of free love. If there's a TV there, it's going to make you look like some kind of net.

    No, what you want to do is have a flap in the floor that the television rises up from. That's the proper way to do it.

    By the by, if you cut the wood a few inches too short, just reduce the overall size of the finished item. It's called miniaturisation. The Japanese have been doing it for years, along with bombing harbours and eating raw fish.

    ReplyDelete
  4. IG, I said "potential" tv. I can't stand the tv up there, because:

    a) it will fall. We have earthquakes.
    b) it's like having an Imax theater and our living room is so small, I'd have to look straight up to see the tv.

    However, I also like keeping my options open.

    ReplyDelete